完整生产线 - 其它 EWD FR 16/ FR 15V/ FR 14/ FR 15H/ FR 15 S 全新 德国

  • 供应
    18277801
  • 日期
    2020-07-14
  • 有效期直到:
    2020-09-12

产品

目录类型 完整生产线
目录 Circular Saw & Profiling Technology
品牌 EWD
模型 FR 16/ FR 15V/ FR 14/ FR 15H/ FR 15 S

规格

项目条件 全新
制造日期 2019
规模 1 - 10
文件
  • 规格文件1
  • 规格文件2
  • 规格文件3
  • 规格文件4
  • 规格文件5
  • 描述 Profiling and sawing with a variable incision machine. Profiling A side board can be profiled per side. The profiling takes place via vertically arranged profiling heads for variable position and variable width of the side board. The profiling heads can be equipped with 2 or 4 knives on the circumference for a variable wood chip length of up to 30 mm. The P-system for corner cutters developed by LEUCO is used for the production of pellet shavings and the creation of non-tear surfaces and extremely long tool life. Disconnect Up to 2 side boards can be separated per side with a double-shaft circular saw module, from the log or model. The thickness of the inner side board is set in the standard version via spacers fixed. For a flexible thickness, also of the inner side board, a saw shaft with telescopic version is optionally available. The horizontal and vertical positioning of the profiling heads and saws is servo-hydraulic. With hydraulically retractable tool change platform. Profiling unit FR 15 V Profiling with vertically arranged profiling head, for variable position and variable width of the side board With the profiling unit FR 15 V a side board can be profiled per side. The profiling takes place via vertically arranged profiling heads. Frequency-controlled profiling heads can be equipped with 2 or 4 knives on the circumference for a variable woodchip length of up to 30 mm. For the production of pellet shavings and the creation of non-cracked surfaces with extremely long tool life, the LEUCO-developed P-system for corner cutters is used. The horizontal and vertical positioning of the profiling heads is servo-hydraulic. With hydraulically retractable tool change platform. Saw unit FR 14 Double-shaft saw for cutting off side goods With the FR 14 saw unit, up to 2 side boards can be separated from the roundwood or model per side. The thickness of the inner side board must be fixed in the standard version via spacer rings. For a flexible thickness, also of the inner side board, a telescopic saw shaft is available as an option. The horizontal and vertical positioning of the saws is servo-hydraulic. With hydraulically retractable tool change platform. Profiling unit FR 15 H Profiling with horizontally arranged profiling head, for variable position and variable width of the side board With the profiling unit FR 15 H, a side board can be profiled per side. The profiling takes place via horizontally arranged profiling heads. Frequency-controlled profiling heads can be equipped with 2 or 4 knives on the circumference for a variable woodchip length of up to 30 mm. The P-System for corner cutters developed by LEUCO is used for the production of pellet shavings and the creation of edge-free surfaces with extremely long tool lives. The horizontal and vertical positioning of the profiling heads is servo-hydraulic. With hydraulically retractable tool change platform. With the FR 15 H profiling unit, the side boards can be profiled at full feed rate even diagonally to the conveying plane for even higher yields. Profiling unit FR 15 S Profiling with vertically arranged profiling heads and upstream grooving saws The cellulose and paper industry requires a high and as homogeneous as possible wood chip quality for their production optimization and the best paper grades. The use of upstream Nutsägen the generation of Kommaspänen is avoided. The wood chips of the FR 15 S thus achieve the maximum process quality that can be achieved in terms of process technology. Please contact us for more information. - Translated with google

    价格&条件

    价格 询价
    销售至: 全球范围

    卖家

    I confirm that I have read and understood Fordaq’s Privacy Statement

    注册同时您亦同意本站法律声明