木板 云杉

  • 需求
    18234589
  • 日期
    2024-03-04
  • 有效期直到:
    2024-08-31

产品

种类 木板
物种类型 欧洲软木
物种 云杉

规格

规模 100-500 立方公尺 每个月 转变
厚度 22; 40; 46; 60 公厘  转变
宽度 90; 95; 110; 120; 135 公厘 转变
长度 4000; 5000 公厘 转变
分级系统 欧洲 – 法国木材与家具技术中心分级规则
品质 4
烘干 窑干(KD)
描述
Size: length 4000-5000 + -10mm, width 95 + 2-0mm, 40 + 2-0mm.
Moisture content: 12 + 0-2%

Closed bowel: intestine, which is in the sawed product, but not visible on either side or side. Up to 10% is allowed

Sawing error: sawing surface sawing caused by sawing. Not allowed.
Saw Trail: Trace caused by protruding saw teeth. Corrosion: the surface is caused by incorrect sawing caused by corrosion. Not allowed.


Hairy surface: the condition of the surface of the sawed product on which the fiber bundles are replaced and protruded. Not allowed.

Deformation: Distortion of sawed products during sawing and / or drying and / or storage. Not allowed.

Bandwidth: longitudinal curvature of sawed product perpendicular to the surface of the board. Not allowed.

Simple bending: single-deformation deformation. Not allowed.


Composite page bias: two or more deformations of alternating curves. Not allowed.

Bending: longitudinal curvature of sawed product perpendicular to the side surface. Not allowed.

Simple lateral curvature: single curve deformation. Not allowed.
Composite lateral curvature: two or more deformations of alternating curves. Not allowed.

Turnout: bending the sawed product along the width of the sheet. Not allowed.

Twisting: Threaded distortion of sawed product longitudinally. Not allowed.
Flat knuckle: the knob on one or both sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Knot on the side: the knot on one or two sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Edge: the bush on one of the edges of the timber. Larger than 400mm without permissible size limit (for lengthening).

Round knuckle: a knot with the largest and smallest diameter in diameter
more than 1.5. Larger than 400mm without permissible size limit (for lengthening).

Oval bush: a bush with the largest and smallest diameter diameter of between 1.5 and 4.0
values. Larger than 400mm without permissible size limit (for lengthening).
Longitudinal bush: a bush with the largest and smallest diameter

more than 4.0. Larger than 400mm without permissible size limit (for lengthening).

Laryngeal blade: an edge with the largest and most visible area on the surface
the smallest diameter ratio exceeds 4.0. Larger than 400mm without permissible size limit (for lengthening).

Two-leafed knuckle: two on the same face surface, starting at exactly the same point
winged or elongated bush. Larger than 400mm without permissible size limit (for lengthening).

Crossbow: the same knuckle on the two opposing sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Unique bush: there are no loose, free surfaces between each bush. Larger

than 400mm without permissible size limit (for lengthening).
Grouped buds: no free-flowing free surfaces between the individual buds. It allowed.

Needle: Round or up to 5 mm in diameter, or oval, healthy, overgrown, or
partially overgrown. It allowed.



Punching knuckle: a knot that is over the cross-sectional area over the surface
¾ part with the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).


Partially overgrown knuckle: a knot that is the cross sectional circumference of the given surface
he grew up in less than ¾ of the wood around him. Larger than 400mm without permissible size limit (for lengthening).

Elongated bush: a bush that has less cross-sectional circumference than the given surface
more than ¼ of the area grew up with the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).

Falling knuckle: dead knuckle that is not firmly attached to the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).

Healthy knuckle: a knot in which no damage is caused by corrosion. Larger than 400mm without permissible size limit (for length

价格&条件

价格 询价
国际商业用语 未完税指定地点交货 (DAP) 国家 匈牙利 地区 Kecskemét - 6000
出货截止日期: 30天后可接受订购
获采购自: 全球范围

买家

我确认我已阅读和理解 Fordaq 的隐私声明

注册同时您亦同意本站法律声明


类似贴文
需求信息 15 Apr 2024 08:10

苏格兰松

来自 IBP Sp. z o.o.
需求信息 10 Apr 2024 03:32

云杉

匿名买家
需求信息 10 Apr 2024 03:33

云杉, 冷杉 a 窑干(kd) 10.000 立方公尺 / 月

来自 NLA WOOD EXPERT SRL
需求信息 21 Feb 2024 12:38

苏格兰松, 云杉 s/f 3-5 公分 * 3-5 公分 * 200-500 公分 新锯 200 立方公尺 / 识别 – 1次

来自 Bitte Eriksson Invest AB
可信度排名提供一个你可以给予该公司信任程度的一个指标 排名建立在我们所获知该公司的信息之上。我们正不断将排名扩展到更多公司,如果您发现某些公司尚未有排名请勿惊讶。

我们用来建立排名的信息种类

  • 我们和该公司进行了什么形式的联系?
    电话联系的次数,上门拜访的次数,展会见面次数
  • 该公司在Fordaq网站业务往来历史.
  • 该公司有无获得Fordaq独立认证的证书?
  • 该公司有否被认可为某一公认行业协会,联盟的成员?
  • 该会员有否被其他会员推荐过?